Oak Ridge Claims No. 1 Position on Latest TOP500 List with Titan
MANNHEIM, Germany; BERKELEY, Calif.; and KNOXVILLE, Tenn.—Advanced reports that Oak Ridge National Laboratory was fielding the world’s fastest supercomputer were proven correct when the 40th edition of the twice-yearly TOP500 List of the world’s top supercomputers was released today (Nov. 12, 2012). Titan, a Cray XK7 system installed at Oak Ridge, achieved 17.59 Petaflop/s (quadrillions of calculations per second) on the Linpack benchmark. Titan has 560,640 processors, including 261,632 NVIDIA K20x accelerator cores.
In claiming the top spot, Titan knocked Lawrence Livermore National Laboratory’s Sequoia out of No. 1 and into second place. Sequoia, an IBM BlueGene/Q system, was No. 1 in June 2012 with an impressive 16.32 Petaflop/s on the Linpack benchmark. With 1,572,864 cores, Sequoia is the first system with one million or more cores.
Rounding out the top five systems are Fujitsu’s K computer installed at the RIKEN Advanced Institute for Computational Science (AICS) in Kobe, Japan (No. 3); a BlueGene/Q system named Mira at Argonne National Laboratory (No. 4); and a BlueGene/Q system named JUQUEEN at the Forschungszentrum Juelich in Germany (No. 5), which was upgraded and is now the most powerful system in Europe.
The other new system in the Top 10 is Stampede, a Dell PowerEdge C8220 system installed at the Texas Advanced Computing Center at the University of Texas in Austin. It uses the brand new Intel Xeon Phi processors (previously known as MIC) to achieve its 2.6 Petaflop/s.
In all there are 23 systems with Petaflop/s performance on the latest list, just four-and-a-half years after the debut of Roadrunner, the world’s first Petaflop/s supercomputer. In spite of delivering petascale performance on applications, the Cray Blue Waters system at NCSA at the University of Illinois, Urbana-Champaign, chose not to submit a Linpack benchmark performance figure.
Here are additional highlights from the 40th list, which can be found at www.top500.org:
-
A total of 62 systems on the list are using Accelerator/Co-Processor technology, including Titan and the Chinese Tianhe-1A system (No. 8), which use NVIDIA GPUs to accelerate computation and Stampede and six others, which are accelerated by the new Intel Xeon Phi processors. Six months ago, 58 systems used accelerators or co-processors.
-
Systems with multi-core processors dominate the list—84.6 percent of the systems use processors with six or more cores and 46.2 percent with eight or more cores.
-
Intel continues to provide the processors for the largest share (76 percent) of TOP500 systems. Intel is followed by the AMD Opteron family with 60 systems (12 percent), the same as six months ago. IBM Power processors are used in 53 systems (10.6 percent).
-
InfiniBand technology now provides interconnects on 226 systems, up from 209 systems, making it the most-used internal system interconnect technology. Gigabit Ethernet interconnects are now found on 188 systems, down from207 six months ago.
-
The U.S. is clearly the leading consumer of HPC systems with 250 of the 500 systems (compared to 252 on the June 2012 list). The European share (105 systems—down from 106 last time) is still lower than the Asian share (124 systems – 122 last time).
-
The number of systems installed in China has now stabilized at 72, compared with 68 and 74 on the last two lists. China occupies the No. 2 position as a user of HPC, ahead of Japan, UK, France, and Germany. When it comes to performance share of the list, however, Japan holds the No. 2 position, ahead of China.
-
European presence on the list is almost equal among UK, France, and Germany, with 24, 21 and 20 systems respectively.
-
The entry level to the list moved up to the 76.5 Tflop/s mark on the Linpack benchmark, compared to 60.8 Tflop/s six months ago. The entry point for the TOP100 increased to
241.3 Tflop/s from 172.7 Tflop/s in six months.
20 Years of the TOP500 List
With the release of the 40thlist, the TOP500 project marks its 20thanniversary of providing insight into HPC performance. The first version of what became today’s TOP500 list started as an exercise for a small conference in Germany in June 1993. Out of curiosity, the authors decided to revisit the list in November 1993 to see how things had changed. About that time they realized they might be on to something and decided to continue compiling the list, which is now a much-anticipated, much-watched and much-debated twice-yearly event. To mark the 20th anniversary and the 40th edition of the list, A special poster display highlighting each of the 15 systems to top the list will be featured at the SC12 conference (Booth 1925) held Nov. 10-16 in Salt Lake City.
About the TOP500 List
The TOP500 list is compiled by Hans Meuer of the University of Mannheim, Germany; Erich Strohmaier and Horst Simon of Lawrence Berkeley National Laboratory; and Jack Dongarra of the University of Tennessee, Knoxville.
Share on Twitter Share on FacebookRecent Posts
- About Possible Foundries and Impossible Processes
- The HPC Triple Crown [HPCWIRE]
- TOP500 Slides from SC12 are now available
- Oak Ridge Claims No. 1 Position on Latest TOP500 List with Titan
- TOP500 List to Mark 20th Anniversary at SC12 in Salt Lake City
Archive
2012
2010
Categories
- Whispers (3)
- press-release (1)
Tags
Feeds
RSS / AtomTOP10 November 2012
Recent Tweets
-
@SiliconWolves
SWCS just ordered the parts for Phase 1 of the #SHODAN Constellation Cluster. Stay tuned. @AMDOpteron #HPC @HPCwire @vyrus00133 minutes ago -
@NourhanMagdyCIS
#????_????? #??????_???? #?????? #HPC41 minutes ago -
@MareenaMills
RT @JRoberts2014: I honestly get more excited for Wednesday night than the weekend. #HPC48 minutes ago -
@JRoberts2014
I honestly get more excited for Wednesday night than the weekend. #HPC49 minutes ago -
@HPC_Guru
HPCwire Podcast: US #exascale roadmap meanders as feds fiddle. w/@addisonsnell @http://t.co/6LcfqutK #HPC via @Intersect36051 minutes ago
Comments
Petaflops/s would mean quadrillion floating point operations per second per second. It should be just 17.59 petaflops, as noted on the Oak Ridge National Laboratory announcement.
Link / ReplyRegarding Blue Waters' missing from the list, NCSA's news release ~10 days ago said BW will NEVER be in Top500 list and this is "with NSF blessing": http://www.ncsa.illinois.edu/News/Stories/TOP500problem/ The reasons are pretty trite and we've heard them over and over again in every year's Top500 BoF session. According to some source of info, the real issue here is BW is not uniform (a la Titan): there are CPU nodes and CPU-GPU nodes, and there is no existing Linpack benchmark which can use the entire BW, and they decided not to invest in developing such Linkpack code. If BW is just a small version of Titan, I am sure NCSA is more than happy to submit the results.
Link / ReplyPetaflops can be used either as a rate (meaning petaflop/s) or as the plural form of petaflop. In the latter usage, petaflops/s is synonymous with petaflop/s.
Link / ReplyNew Comment