|
|
| |
|
|
| |
Factsheet:
Max plate size: 800 x 1050 mm (31x44 inch)
Plate thickness: 1.00, 1.14, 1.70, 2.30, 2.54 and 2.84 mm
Processing time: max 45 minutes
Water wash (no solvents) for: environmental friendly and odor free use
PLC Touchscreen for: easy and userfriendly operation
Stainless Steel for: durability and high quality
2 Tanks and membrane filters for: continuous plate processing and recycled water
Temperature control and 3 drying drawers for: quick drying time and maximum plate volume
Full description
The AquaSupreme is a complete photopolymer machine for processing water washable flexo printing plates up to 800x1050mm (31x41 inch). With the AquaSupreme a perfect flexo printing plate can be made in a very short time. In the automatic washout unit of the AquaSupreme, photopolymer materials with thicknesses of 1.00, 1.14, 1.70, 2.30, 2.54 and 2.84 mm can be washed out without difficulty. The plate to be washed out is fixed in the orbital washout unit on a sticky base plate. The plate is washed out in a mixture of water and 1% dishwasher soap, at a temperature of approximately 40°C.
The unit is equipped with a dual membrane filter. With this the environmental burdening is kept to an absolute minimum. The membrane unit separates photopolymer from the washout water. After addition of absorb gelatine for example, the photopolymer residue can be disposed of as standard solid waste together with household refuse. The recycled water is re-used without adding any detergent.
The stainless steel units consist of :
• A combined exposure unit/hot-air dryer/Anti-Tacker
• An exposure unit with high-output U.V. lamps for very short exposure times and a vacuum table
• A temperature controlled hot-air dryer with 3 drawers
• An integrated light finisher (Anti-Tacker)
• An automatic opening washout unit with orbital washout movement, temperature control, adjustable brush, water tank with pump and sophisticated membrane.
The machine is equipped with a PLC , which has a digital display for:
Back exposure - Main exposure - Washout time - Drying time - Anti tacking - Post exposure
The PLC is operated by touch screen control.
Optional combi drawer
With the optional combi drawer, detacking and post exposing are combined in one drawer, which gives the possibility of detacking and post-exposing a plate at the same time or they can be run automatically one after the other. This decreases time and handling spent on making a flexo printing plate.
Dimensions of the washer : 1570x1380x1220 mm (62x55x49 inch)
Dimensions of the exposure unit/Dryer : 1350x1230x1070 mm (54x49x43 inch)
Electrical connection : 400V, 3 Phase, 50 Hz, 16 Amp. (other voltages available on request)
There is also an option of an in-line AquaSupreme version. Our excellent filtration system together with a well proven design ensures a clean and easy operation.
|
|
|
|
|
