Shock mount

From Wikipedia, the free encyclopedia

This article is an orphan, as few or no other articles link to it. Please introduce links to this page from related articles; suggestions are available. (November 2006)

microphone with shock mount

In a variety of applications, a shock mount is a mechanical fastener that connects two parts elastically. One common application is a studio microphone mount, in which the microphone is partially isolated from vibrations that might otherwise be better transmitted to the microphone through the mic stand, causing unwanted sounds to be added to the output signal, like vibrations and unwanted disturbances. A different design is found in some compact disk players, in which soft bushings are all that mechanically hold the disk and reading assembly, thereby isolating it from outside vibrations and from other outside loads such as torsion.

One of two shock mounts holding the back of the Eames Lounge Chair Wood (LCW). The black rubber is glued to the wood and the bolt only connects the metal to the wood. There are three similar shock mounts supporting the seat.

A similar idea, also known as a shock mount is found in furniture design, introduced by Charles and Ray Eames. This provides some shock absorption and serves as a living hinge, allowing the seat back to pivot.

[edit] See also

• Bushing
• Vibration isolation

[edit] References

This article does not cite any references or sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (March 2007)

This technology-related article is a stub. You can help Wikipedia by expanding it. v • d • e