Heat sink
From Wikipedia, the free encyclopedia
A heat sink (or heatsink) is an environment or object that absorbs and dissipates heat from another object using thermal contact (either direct or radiant). Heat sinks are used in a wide range of applications wherever efficient heat dissipation is required; major examples include refrigeration, heat engines, cooling electronic devices and lasers.
Contents |
[edit] Principle
Heat sinks function by efficiently transferring thermal energy (heat) from an object at a relatively high temperature to a second object at a lower temperature with a much greater heat capacity. This rapid transfer of thermal energy quickly brings the first object into thermal equilibrium with the second, lowering the temperature of the first object, fulfilling the heat sink's role as a cooling device. Efficient function of a heat sink relies on rapid transfer of thermal energy from the first object to the heat sink, and the heat sink to the second object.
The most common design of a heat sink is a metal device with many cooling fins. The high thermal conductivity of the metal combined with its large surface area due to the fins results in the rapid transfer of thermal energy to the surrounding, cooler material. This cools the heat sink and whatever it is in direct thermal contact with. Use of fluids (for example coolants in refrigeration) and thermal interface material (in cooling electronic devices) ensures good transfer of thermal energy to the heat sink. Similarly a fan may improve the transfer of thermal energy from the heat sink to the air by moving cooler air between the fins.
[edit] Performance
Heat sink performance (including free convection, forced convection, liquid cooled, and any combination thereof) is a function of material, geometry, and overall surface heat transfer coefficient. Generally, forced convection heat sink thermal performance is improved by increasing the thermal conductivity of the heat sink materials, increasing the surface area (usually by adding extended surfaces, such as fins or foam metal) and by increasing the overall area heat transfer coefficient (usually by increase fluid velocity, such as adding fans, pumps, et cetera).
[edit] Use in electronics
[edit] Explanation
In common use, it is a metal object brought into contact with an electronic component's hot surface — though in most cases, a thin thermal interface material mediates between the two surfaces. Microprocessors and power handling semiconductors are examples of electronics that need a heat sink to reduce their temperature through increased thermal mass and heat dissipation (primarily by conduction and convection and to a lesser extent by radiation). Heat sinks are widely used in electronics, and have become almost essential to modern integrated circuits like microprocessors, DSPs, GPUs, and more.
[edit] Construction and materials
A heat sink usually consists of a base with one or more flat surfaces and an array of comb or fin-like protrusions to increase the heat sink's surface area contacting the air, and thus increasing the heat dissipation rate. While a heat sink is a static object, a fan often aids a heat sink by providing increased airflow over the heat sink, thus maintaining a larger temperature gradient by replacing the warmed air more quickly than passive convection achieves alone. This is known as a forced air system.
Heat sinks are made from a good thermal conductor such as copper or aluminum alloy. Copper (401 W/(m·K) at 300 K) is significantly heavier and more expensive than aluminum (237 W/(m·K) at 300 K) but is also roughly twice as efficient as a thermal conductor. Aluminum has the significant advantage that it can be easily formed by extrusion, thus making complex cross-sections possible. The heat sink's contact surface (the base) must be flat and smooth to ensure the best thermal contact with the object needing cooling. Frequently, a thermally conductive grease is used to ensure optimal thermal contact; such grease usually contains ceramic materials such as beryllium oxide and aluminium nitride, but may alternatively contain finely divided metal particles, e.g. colloidal silver.[1] Further, a clamping mechanism, screws, or thermal adhesive hold the heat sink tightly onto the component to maximize thermal conductivity, but specifically without pressure that would crush the component.
[edit] PC marketplace
Due to recent technological developments and public interest, the retail heat sink market has reached an all time high. In the early 2000s, CPUs were produced that emitted more heat than ever before, escalating requirements for quality cooling systems.[citation needed]
Overclocking has always meant greater cooling needs, and the inherently hotter chips meant more concerns for the user. Efficient heat sinks are vital to overclocked computer systems because the higher a microprocessor's cooling rate, the faster the computer can operate without instability. Generally, faster operation leads to higher performance.
[edit] In soldering
Temporary heat sinks were sometimes used while soldering circuit boards, preventing excessive heat from damaging sensitive nearby electronics. In the simplest case, this means partially gripping a component using a heavy metal crocodile clip, hemostat or similar clamp. Modern semiconductor devices, which are designed to be assembled by reflow soldering, can usually tolerate soldering temperatures without damage. On the other hand, electrical components such as magnetic reed switches can malfunction if exposed to higher powered soldering irons, so this practice is still very much in use.[2]
[edit] Recent developments
More recently, synthetic diamond cooling sinks are being researched to provide better cooling. Also, some heat sinks are constructed of multiple materials with desirable characteristics, such as phase change materials, which can store a great deal of energy due to their heat of fusion.
[edit] As a problem in firestopping and fireproofing
 |
This article needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (January 2010) |
A heat sink is rarely a desired thing in passive fire protection. Rather, it is usually a problem that must be overcome to maintain fire-resistance ratings. The proven ability to overcome heat sinks in construction is subject to building code and fire code regulations.
[edit] Firestopping
- Problem - Metallic penetrants and sleeves, at a density of 7.9 kg/L are denser than common firestops or concrete. Consequently, during a fire, they will absorb more heat and conduct it to the unexposed side of a fire barrier (thus "cooling" the exposed side at the expense of the unexposed side), such as the cold side of a firewall. This is undesirable. Even if the fire is stopped by the barrier, one must keep the unexposed side cool to prevent autoignition of combustibles on the unexposed side of a fire barrier. The unexposed side may very well be an area of refuge, which must be safeguarded to comply with the building code. Greater penetrant and sleeve conductivity leads to lower T-ratings. Higher density firestops, such as firestop mortars act as a heat sink to absorb heat away from small penetrants, such as cables, thus increasing T-ratings.
- Benefit - a rare exception where heat sinks are beneficial in firestops is where intumescents must be activated, such as in a firestop containing a plastic pipe. Heat sinks such as wire mesh and extra metallic sleeving may be used to carry heat to intumescents to activate expansion such as to choke off a melting plastic pipe or melting pipe covering, such as foamed plastic or fibreglass.
[edit] Fireproofing
In fireproofing of structural steel as well as providing circuit integrity to cables, cable trays, junction boxes and electrical conduit, the metallic items that are protected by the fireproofing measures act as a heat sink. Fireproofing methods are used to defeat the heat sink properties of the items they protect. In the case of circuit integrity measures, electrical services will fuse and short circuit above 140°C.
[edit] See also
- Computer cooling
- Heat pipe
- Heat pump
- Radiator
- Thermal management of electronic devices and systems
- Thermal resistance in electronics
[edit] References
 |
This article includes a list of references, related reading or external links, but its sources remain unclear because it lacks inline citations. Please improve this article by introducing more precise citations where appropriate. (August 2009) |
- ^ Greg Becker, Chris Lee, and Zuchen Lin (July 2005). "Thermal conductivity in advanced chips — Emerging generation of thermal greases offers advantages". Advanced Packaging: 2–4. http://www.apmag.com/. Retrieved 2008-03-04.
- ^ James Johnston, "Reed Switches", Electronics in Meccano, Issue 6, January 2000.
[edit] External links
 |
Wikimedia Commons has media related to: Heat sinks |
