L3/35

From Wikipedia, the free encyclopedia

Jump to: navigation, search
Carro Armato L3/35
L3 tankette.jpg
Type Tankette
Place of origin Italy Italy
Service history
In service from 1935
Used by Italy, Austria, Brazil, Bulgaria, China, Croatia, Hungary, Nationalist Spain, and others
Wars Austrian Civil War, Second Sino-Japanese War, Second Italo-Abyssinian War, Spanish Civil War, Slovak–Hungarian War, Invasion of Albania, Anglo-Iraqi War, World War II
Production history
Produced 1933–36
Number built circa 2,000–2,500
Variants L3/33, L3/38, L3 cc, L3 Lf,
Specifications
Weight 3.2 tonnes
Length 3.17 m (10 ft 5 in)
Width 1.4 m (4 ft 8 in)
Height 1.3 m (4 ft 3 in)
Crew 2 (commander and driver)

Armor 6–14 mm
Primary
armament
2 × 8 mm machine guns
Engine FIAT-SPA CV3 water cooled
43 hp (32 kW)
Suspension bogie
Operational
range
125 km (78 mi)
Speed 42 km/h (26 mph) road

The L3/35 or Carro Veloce CV-35 was an Italian tank used before and during World War II. Although designated a light tank by the Italian Army, its turretless configuration, weight and firepower make it closer to contemporary tankettes.

Contents

[edit] Development

The L3/35 was developed from the four Carden Loyd Mark VI tankettes imported from Britain in 1929. The first vehicle developed by the Italians from the Carden Lloyd tankette was designated as the CV-29; "CV" being an abbreviation of Carro Veloce (Italian: "fast tank") and "29" as the year of adoption. Only twenty-one CV-29s were built.

[edit] L3/33

In 1933, a new design was built jointly by the Fiat Company of Turin and the Ansaldo Company of Genoa. This vehicle was introduced as the Fiat-Ansaldo CV-33. About 300 CV-33s were built.

[edit] L3/35

In 1935, a slightly improved model of the CV-33 was introduced and designated as the CV-35. The primary differences were that the armour was bolted rather than riveted and the single 6.5 mm machine gun was replaced with twin 8 mm machine guns. Many older CV-33s were retrofitted to meet the specifications of the CV-35. In 1938, the vehicles were redesignated as the L3/33 ("L" for Leggero or 'light') and the L3/35.

[edit] L3/38

In 1938, a further development of the L3 vehicle was created and designated as the L3/38. It does not appear that many of these vehicles were built or saw service. The L3/38 had a torsion bar suspension and a single 13.2 mm Madsen machine gun.

[edit] Layout

Brazilian Army L3/35 tankette - Rear view.

The L3/35 was a lightly armored two-man vehicle typically armed with twin 8 mm machine guns, though variants were developed with other armament. Other than the number and type of machine guns, the differences between the L3/35 and the L3/33 were few. Both featured riveted and welded construction.

The vehicle's commander/gunner sat on the left and the driver sat on the right. The engine was mounted transversely [1] in the rear. A circular radiator was mounted behind the engine. The transmission went to the front to the final drive. The Vickers-Carden-Lloyd type suspension had two three-wheel bogies on leaf spring and a single unsprung wheel on each side. There was an acacia wood rail that the top run of the tracks went on.

[edit] Production and sales

Between 2,000 to 2,500 L3 tankettes were built in different models and variants for the Royal Italian Army (Regio Esercito) and for other users. Twenty L3/33 tankettes were sold to China. Other L3 tankettes were sold to Afghanistan (unknown number), Albania (unknown number), Austria (72), Bolivia (14), Brazil (23), Bulgaria (14), Croatia (10), Hungary (65), Iraq (16), and Nationalist Spain. Many foreign buyers substituted other machine guns as the main armament. The Hungarians added a raised commander's vision cupola on some of the L3s they acquired. In 1938, the Brazilian Army bought several L3/35 tankettes which remained in active service until 1945 when some units were resold to the Dominican Republic.

[edit] Combat history

Italian L3/35 in the Balkans, August 1943.
Italian L3/35 in Albania, September 1943.
Cloose-up of Italian L3/35 in the Balkans, August 1943.

In addition to seeing action in the Second Italo-Abyssinian War, the Second Sino-Japanese War, the Spanish Civil War, the Slovak-Hungarian War, and the Anglo-Iraqi War, the L3 was used almost everywhere that Italian troops fought during World War II. L3s were found on the Italian/French border, North Africa, Italian East Africa, the Balkans, USSR, Sicily, and Italy.

The combat history of the L3s during the interwar period was not good. On at least two occasions during the Italian invasion of Ethiopia, L3s were put out of action by massed infantry attacks. In Spain, L3s of the Corps of Volunteer Troops (Corpo Truppe Volontarie, or CTV) were totally out-classed by the T-26 and BT-5 tanks provided to the Republican forces by the Soviet Union. Fortunately for the Hungarians, the L3s were not a factor in their brief war with Slovakia.

On 10 June 1940, when Italy entered World War II, the Royal Italian Army (Regio Esercito) possessed only about one-hundred M11/39 medium tanks in two tank battalions. L3 tankettes still equipped all three Italian armored divisions, they equipped the tank battalions in the motorized divisions, they equipped the light tank squadron group in each "Fast" (Celere) division, and they equipped numerous independent tank battalions.

On 22 March 1941, two Iraqi L3s were reported to have been put out of action near Fallujah during the Anglo-Iraqi War.

More than 40 captured L3 tankettes were used by the Greek Army during the Greco-Italian War fought from 1940 to 1941. After the invasion of Yugoslavia in 1941 and Greece in 1941, L3 tankettes were also captured by the Yugoslav and Greek resistance forces. From 1941, some L3 tankettes were given to the German puppet government of the Independent State of Croatia (Nezavisna Država Hrvatska, or NDH).

Though numerous, Italy's tankettes proved to be outclassed from the start and also proved to be of low tactical value. Other than those used for occupation duties in the Balkans and elsewhere, few L3s remained in front line service past the end of 1940. After the Kingdom of Italy quit the war in 1943, L3 tankettes were used by German Army (Wehrmacht Heer) forces and by pro-Nazi forces of the National Republican Army (Esercito Nazionale Repubblicano) of the Italian Social Republic (Repubblica Sociale Italiana, or RSI).

[edit] Variants

The L3/35 appeared in several variants including an anti-tank vehicle and a vehicle with a flame thrower.

[edit] L3 cc anti-tank tank

A captured L3 cc (on the left) and an L3/35 (on the right) outside Bardia in 1941.

The "L3 cc" anti-tank (controcarro) was an L3 with a Solothurn 20 mm anti-tank rifle mounted in place of its normal machine gun armament. Only a few were so modified, and they saw action only in North Africa.

[edit] The usurped upgrade

During the Spanish Civil War, a group of German Panzer I light tanks was upgraded with 20 mm Breda model 1935 anti-aircraft guns rather than upgrade a group of Italian L3s. The Panzer Is carried two machine guns like the L3/35. Unlike the L3, the machine guns in the German tanks were mounted in a rotating turret.

On 8 August 1937, Major General García Pallasar had received a note from Generalísimo Francisco Franco which expressed the need for a Panzer I armed with a 20 mm gun. Ultimately, the piece chosen was the gun available from Breda. This was due to the simplicity of the design over competitors such as the German Flak 30. Furthermore, the 20 mm Breda was capable of perforating 40 mm of steel at 250 meters, which was more than sufficient to penetrate the frontal armor of the T-26 tanks provided to the Republicans by the Soviets. Although originally forty Italian L3/35 tankettes were ordered with the original armament exchanged for the 20 mm Breda Model 35, this order was subsequently cancelled after it was thought that the adaptation of the same gun to the Panzer I would yield better results. Prototypes were ready by September 1937 and an order was placed after successful results. The mounting of the Breda machine gun onto the Panzer I required the original turret to be opened at the top and then extended by a vertical supplement. Four of these tanks were finished at the Armament Factory of Sevilla, but further production was cancelled as it was decided that sufficient numbers of Republican T-26 tanks had been captured to fulfill the Nationalist leadership's request for better tanks. The Breda modification of the Panzer I was not particularly liked by German crews, as the unprotected gap in the turret, designed to allow the tank's commander to aim, was found to be a dangerous weak point.[2]

Later, the Italians mounted a few L3 tanks with Solothurn 20 mm anti-tank rifles as apposed to the 20-mm Breda model 1935 anti-aircraft guns.

[edit] L3 Lf flamethrower flame tank

Italian tankettes advancing with a L3 Lf flame thrower tank in the lead at the Battle of Guadalajara.

The "L3 Lf" flamethower (lancia fiamme) flame tank was another variant of the L3 tankette. Development began in 1935. The flamethrower nozzle replaced one of the machine guns, and the flame fuel was carried in an armored trailer towed by the vehicle. Later versions had the fuel carried in a box-shaped tank mounted above the L3's engine compartment. The vehicle weighed 5 tonnes. The L3 Lf saw action in Abyssinia, Spain, France, the Balkans, North Africa, and Italian East Africa.

[edit] Other variants

Prototypes of a bridging vehicle and of a radio command vehicles were developed.

[edit] See also

[edit] References

  1. ^ Italy's L3/33 (CV 33) and L3/35 (CV 35) tankettes wwiivehicles.com
  2. ^ Franco, Panzer I, pp. 47-49

[edit] Sources

  • Franco, Lucas Molina (2005) (in Spanish). Panzer I: El inicio de una saga. Madrid, Spain: AF Editores. p. 64. ISBN 84-96016-52-8. 

[edit] External links

External images
Model of the tank with model soldier in comparison