Incense Burners & Holders

These silvery and iridescent abalone shells are useful for burning cone or resin incense. They are also handy as receptacles for smudge wands, holder for crystals or trinkets, or just as decorations on their own. The sizes and markings will vary slightly, as these are produced by nature.

Anubis, jackal headed god of the underworld, adorns this incense holder. Seated at one end, the father of embalming patiently waits to contemplate the smoke that will be rising from either the cone or stick incense this piece will hold, seeing within the souls he has escorted to their final judgment. Anubis` ears rise to 3", and the holder itself stretches to 11". It is made of cold cast resin, and hand painted.

Economical, functional design in wood for stick incense. The end that holds the incense stick curves up slightly. Designs vary; each is unique.

Decorative inlaid or carved wooden box for holding your incense sticks. It has a hole for placing the end of a burning stick, so the box doubles as an ash catcher. Separate compartments for unlit sticks (little trap door on side) & for burning/ash collection (curved "coffin" lid). Measures approx. 12" long.

Brass incense burner depicts a Pentagram design where the stick is held. Triple Goddess symbol apears at the base and Celtic knot design encircles the area for catching ashes. Rich copper coloring. ~9" length.

Bast, the beloved cat headed goddess of Ancient Egypt, stands at the ready on one end of this incense holder. Bast, a goddess who loved mankind, appears to be ready to spring into action if she sees the smallest ember fall from a burning stick of incense, or a slight breeze knocks over a cone. Made of cold cast resin & hand painted, Bast herself crests 3 1/2" inches tall, with the holder stretching to a length of 11".

Wooden Pentagram coasters with silver or goldtone inlayed pentagram on the top surface of each coaster, our choice. Dark stained wood approx 2 3/4" dia.

Small (approximately 3" tall) brass burners in various shapes for charcoal & resin or cones. Each one is unique.

Various designs of brass incense burners for cone or small stick incense. Measuring only 2 1/4" high, the tops of these burners lift off for easy cleaning and refilling.

Medium-sized brass hanging incense burner for use with charcoal and resin, granular, or cone incense. Shape and size may vary slightly. Approximately 8" tall.

Small size brass hanging incense burner for use with charcoal & resin, granular or cone. Shape and size may vary slightly. 5"-6" high.

Brass incense burner for use with charcoal & burning resin, granular or powder incense. Approximately 2.5" diameter. Delicate feather, leaf design. Shapes may vary.

Brass incense burner for use with charcoal & burning resin, granular or powder incense. Screen is removable. Approx. 3" dia.

Wooden coasters to protect the surfaces that incense burners or drinking glasses are placed upon. Designs may vary. 3" approximate diameter.

Pewter, disk-shaped, cone incense burner with a Celtic design motif. Approximately 1.5" diameter.

Pewter, disk-shaped, cone incense burner with a Celtic tri-horse motif representative of the Celtic Horse Goddess Epona. Approximately 1.5" diameter.

Pewter, disk-shaped, cone incense burner with a Central Dragon motif and three dragon's heads as "feet". Approximately 1.5" diameter.

Pewter, disk-shaped, cone incense burner with a design of 3 dancing faeries. Approximately 1.5" diameter.

A sinuous eastern dragon claws at the smoke from your favorite incense stick or cone. With one of his wings curled beneath him to form the ash-catcher, and another above to guide the smoke in the right direction, this 10" long 4 1/2" tall dracoform is a beautiful representation of these beings whose name has become synonymous with power.

A butterfly rests upon the outstretched finger of a beautiful fairy princess, dreamily thinking of other places and adventures. Her fairy wings form the ash catcher on this delightful 10" x 2 1/2" stick incense burner. Made out of handpainted, cold-cast resin, this piece is sure to delight in the details, so fine you can see the expression on her face.

A sweet little fairy kneels at the base of this incense holder, her head turned upward to watch the smoke rise. Made of handpainted cold-cast resin, with a 10" long ash catcher made to resemble a gently curling leaf. Including the base beneath her, the fairy stands a total of 3" tall up to the tips of her violet wings.

A fierce gargoyle crouches atop a stone vessel, holding your favorite stick incense close to his chest in one well-muscled hand. Made out of cold-cast resin, this 10 1/2" x 3 1/4" incense burner has the high level of detail you`ve some to expect from cold cast resin. Fine details are plainly visible, from the cracks in the stone boat beneath his feet to the expression on his face.

A slim western dragon rears up on her hind legs atop a vessel of stone, a satisfied yet inquisitive look on her expressive face. Made out of cold-cast resin, the entire length of this 3 3/4" x 10" incense holder is adorned with neo-Celtic knotwork in the Gothic style.

Fill a bowl with this beautiful black sand to make an ideal burning surface for incense sticks, cones, or granular incense with a charcoal base. By placing sand in a burn safe bowl you achieve additional stability and security for lit incense when your attention is elsewhere.

Fill a bowl with this beautiful blue sand to make an ideal burning surface for incense sticks, cones, or granular incense with a charcoal base. By placing sand in a burn safe bowl you achieve additional stability and security for lit incense when your attention is elsewhere.

Fill a bowl with this gorgeous green sand to make an ideal burning surface for incense sticks, cones, or granular incense with a charcoal base. By placing sand in a burn safe bowl you achieve additional stability and security for lit incense when your attention is elsewhere.

Fill a bowl with this rich red sand to make an ideal burning surface for incense sticks, cones, or granular incense with a charcoal base. By placing sand in a burn safe bowl you achieve additional stability and security for lit incense when your attention is elsewhere.

Fill a bowl with this wonderful white sand to make an ideal burning surface for incense sticks, cones, or granular incense with a charcoal base. By placing sand in a burn safe bowl you achieve additional stability and security for lit incense when your attention is elsewhere.

Great for all your burning needs. Iridescent blue/purple bown is ~4" round and ~1.5" deep. This burner comes with Burning Sand and makes an excellent base for charcoal resins and powders and for standing sticks or cones upon.

Made of handpainted cold cast resin, this 11" Isis incense burner can be used with cone or stick incense. Isis, most revered of Egyptian Goddesses rises 3" from where she merges with the base of this beautiful piece.