|
CottonTail (CAD/CAM Pictures) |
Here is a picture from the CottonTail CAD/CAM program. IT shows a castle in a CAD window and the path the dremel tool would have to take to cut the castle from a 2x2" block of wood. Notice that the path of the dremel is offset because the center of the tool is plotted and a cylindrical bit is assumed with a certain radius.
The following is a picture of me and the machine with a dremel tool loaded:
The following is a picture of a frosting castle made by an extruder loaded in the machine:
The following are soap and balsa wood carvings made with a dremel:
|
